Save, water based general purpose degreaser
Product description:
DG Enviro Cleaner is neutral, safe, multi purpose cleaner and deagreser based on natural orange solvent extracts and andvanced surfactant formulation. It may be used successfully for most marine and industrial applicatons. It can be used for cleaning and deagresing deck and machinery. Easly removes greasy grime, oil, diesel spillages, sludge, wax, carbon deposits.
How to use:
Apply with nozzle foam making appliances, a brush, a cloth, an atomiser or use in immersion cleaning
General cleaning and degreasing:
use the product undiluted or dilute it with water at 1:1 to 1:10 ratio depending on how dirty the surface is.
Steam cleaning: allowable dilution ratios 1:10 - 1:50
Removing grease, oils and fats: use the product undiluted or dilute it with water at a maximum ratio of 1:5
Immersion cleaning: dilute with water a ratio of 1:2-1:5. After cleaning, rinse the surface.
Package available: 20 or 25 liters canister
Heavy duty water based degreaser
How to use:
Apply with a brush, rag, spray or use immersion
General cleaning and degreasing:
dilution of 1:1 to 1:20 with water.
Steam cleaning: Dilution 1:20 to 1:100 with water
Cleaning: oils, grease: Dilution max.1: 10
Immersion cleaning: Dilution 1:5 to 1:20 of water.
It is recommended to rinse with warm water to accelerate drying.
In every method of cleaning time of contact should be between 5 minutes to 2 houres.
Provide adequate ventilation indoors.
Package available: 20 or 25 liters canister
Degreaser for oil and grease removal
Product description:
DG Petrosolv is heavy duty degreaser for removal of oil and grease. It can be used for deck and machinery cleaning, tank tops, bulkheads. It contains mixture of save, natural solvents and non-ionic surfactants. DG Petrosolv is highly effective degreaser. It is not corrosive and not toxic product. It is highly biodegradable and save for using on all common metals and painted/waterproof surfaces. It has nice orange smell.
How to use:
DG Petrosolv can be applied by brush, spray, immersion, soaking. Petrosolv can be used undiluted or diluted with water. Allow a residence time of at least 15-45 minutes for better penetration. After that period rinse cleaned surface with water (if possible with hot water) using waterjet (if possible high pressure waterjet).
Package available: 20 or 25 liters canister
Non-conductive electro cleaner
Product description:
DG Electro Cleaner is special solvent for removal of oil and grease from electrical machines, components, equipment etc. It not contains chlorinated solvents. DG Electro Cleaner is almoust odorless and has high flash point. It has quick action and penetration of cleaned elements. After cleaning there is any residues moisture residue. That product is non-corrosive for normal componets.
How to use:
DG Electro Cleaner has to be used only in ventilated areas. It must be used udiluted.
It can be applied by brush, swab or by spraying the cleaned parts.
That product can be used by immersion bath for cleaning extremely fouled elements.
Remained solvent can be evaporated by using compressed air.
NOTE:
Never use product on a running generator or motor.
Package available: 10, 20 or 25 liters canister
Product to clear oil spills
Product description:
Concentrated product, water-based, biodegradable formulation based on solvents, emulsiyfing agents and surfactants and hydrocarbons used to disperse and clear accidental oil spills on deck and in the sea. Product can be used also as a tank cleaner. Dispers mineral oils, crude oil, fuel oil, lubricant oil, etc.
How to use:
Spills on water:
If it is possible pump or skim oil spilled as much possible.
When as most of the spilled oil is removed apply DG Oil dispersant undiluted.
For small spills use hand spray. It neccesery to white few minutes untill product reacts and disperse oil. Wash down oil spill with a high pressure unit.
Tank cleaning:
Use diluted with water from 5 to 10%. Wash down with fresh water with a high pressure unit.
Package available: 20 or 25 liters canister
Product for cleaning of Diesel Engine charge air coolers
Product description:
DG Air Cooler Cleaner is special waterbased, degreasing formula for cleaning diesel Air Coolers and Turbocharger . Product contains liquid blend of solving, cleaning and anti-corrosive gents. DG Air Cooler Cleaner cleans air side of the charge air cooler,turbo-charger and scavenging air system, by dissolving any lube-oil and fuel-oil contamination as well as contaminations entered via the air inlet. Product contains no chlorinated or aromatic hydrocarbon solvents, nonyl phenol ethoxylates or other substances harmful to the environment
How to use:
DG ACC is suitable for all types of diesel engines. Product have to be used mixed with fresh water (10-30% of DG ACC - depending on severity of the contamination). The following table shows amount of solution required to clean an air cooler. For proper calculation find the cross-sectional area of the cooler and use 3 litres of cleaning solution ) per square metre or as table below. This is based on one injection every 24 hours.
Engine HP:
20% of DG ACC mixed with fresh water
6,000 to 12,000 - 3 litres
12,000 to 24,000 - 4.5 litres
24,000 or more - 6 litres
Bath Cleaning:
- Put parts to be cleaned into a bath of undiluted DG Air Cooler Cleaner and allow deposits to be broken (time of bathing - 3-12 hours). After cleaning, rinse the surface with a high pressure unit.
Package available: 20 or 25 liters canister
P water based , caustic solvent for removing carbon deposits owerful .
Product description:
DG Carbon Remover is water based , powerful liquid solvent for removing all kind of carbon deposits. Very quickly solve deposits, therefor eliminates need for hard scraping. DG Carbon Remover is not flammable.
How to use:
Put the cleaned elements in a steel bath and filled with DG Carbon Remover. Wait untill all carbon deposits will be soaked. Take out cleaned components out of bath and wash with fresh water or powerfull waterjet.
Package available: 20 or 25 liters canister
Universal cleaning agent and degreasant
Product description:
Multicleaner Eco is a safe, water-soluble, biodegradable cleaning agent. As it contains potent water softeners, it successfully removes the toughest dirt. Ideal for hand, steam and immersion cleaning. You can safely use Multicleaner Eco on most surfaces, including glass, metal, ceramics and plastics. It removes grease, oils, tar, asphalt, inks, wax, lubricants, adhesives, and many other types of tough dirt and grime leaving a fresh scent of lemon.
How to use:
Apply with nozzle foam making appliances, a brush, a cloth, an atomiser or use in immersion cleaning.
General cleaning and degreasing:
use the product undiluted or dilute it with water at 1:1 to 1:10 ratio depending on how dirty the surface is.
Steam cleaning:
allowable dilution ratios 1:10 - 1:50
Removing grease, oils and fats:
use the product undiluted or dilute it with water at a maximum ratio of 1:5
Immersion cleaning:
dilute with water a ratio of 1:2-1:5. After cleaning, rinse the surface.
Package available: 20 or 25 liters canister
Today 0 Week 64 Month 45 All 22929
Currently are 3 guests and no members online